Sovol SV08 Enhanced Cable Chain Top Connector 3D Printer Model

Author: @
License: CC BY-SA
File formats: stl,STL
Download type: zip
Size:648.3KB

The file 'Sovol SV08 Enhanced Cable Chain Top Connector 3D Printer Model' is (stl,STL) file type, size is 648.3KB.

Description Files (6)

Summary

I made a few minor updates to their chain holder. These are all Sovol SV08 Top Chain brackets:

  • Sovol_SV08_Wire_harness_bracket_7.30.STL - Original from Sovol for adding their Enclosure Kit
  • SovolSV08part1.stl - My take on the original bracket, I added a small stop on the back to hold better
  • ImporovedSovolSV08part1.stl - Shorter bracket so there is room for the Klicky on the Right and added a 2nd T-NUT to secure it better
  • ImporovedSovolSV08part1WithYEndStop.stl - Same as the above but also has a Y Endstop switch holder
  • BottomChainRestraintSV08.stl - Modified bottom restraint making it flat on the right so there is more room for the Klicky arm to come down

The picture is showing the one with the Y Endstop at min and max height.

Note: I removed 1 link from the original chain,

See Alternative Bottom piece: https://www.printables.com/model/1067659-sv08-simplifiedshortened-chain-end

BottomChainRestraintSV08.stl 400.2KB
ImporovedSovolSV08part1.stl 237.6KB
ImporovedSovolSV08part1WithYEndStop.stl 297.8KB
SovolSV08part1.stl 266.9KB
Sovol_SV08_Wire_harness_bracket_7.30.STL 538.3KB
Under_the_drag_chain_fixed_joint.STL 401.4KB

Tags

You might also like