Sovol SV04 Drawers 3D Printer Model
The file 'Sovol SV04 Drawers 3D Printer Model' is (stl) file type, size is 53.2KB.
The file 'Sovol SV04 Drawers 3D Printer Model' is (stl) file type, size is 53.2KB.
Although there are some good drawer systems for the SV04 I wanted one that I could screw on to the printer with some t-nuts rather than set beneath. You can use the top of the drawers that show as bins to store small items.
The only piece that needs supports is the center bracket.
There are 2 options to screw the center piece to. One is on the front horizontal extrusion and the other is the center belt extrusion.
This should also be a fairly simple design to remix.
For the drawer shells you can use the mirror function of the SV04.
To attach the center bracket onto the printer I used 2 M4 screws and 2 M4 t-nuts.
The longer strips of the shells will fit into the inner side of the outer side rails.
| CENTER_BRACKET.stl | 79.4KB | |
| DRAWER-1x1.stl | 4.8KB | |
| DRAWER-1x2.stl | 5.6KB | |
| DRAWER-1x3.stl | 6.3KB | |
| DRAWER-2x1.stl | 5.6KB | |
| DRAWER-2x2.stl | 7.1KB | |
| DRAWER-2x3.stl | 8.7KB | |
| DRAWER-4x3.stl | 13.4KB | |
| SHELL.stl | 82.9KB |
