Soundcore Q30 Replacement Slide Arm 3D Printer Model
The file 'Soundcore Q30 Replacement Slide Arm 3D Printer Model' is (stl,step) file type, size is 2.4MB.
The file 'Soundcore Q30 Replacement Slide Arm 3D Printer Model' is (stl,step) file type, size is 2.4MB.
This is a resin printable (maybe FDM, but it would be hard) replacement for the very fragile arm plastic for the Soundcore q30 which are good headphones but a terrible mechanical design.
I attempted to make these a like for like replacement (but stronger) but failed so I kept making changes until I got something that worked. It's far from perfect (and very messy) but it's good enough, you'll need 3 M3 self-tapping screws (You can reuse one from the Soundcore)
Feel free to remix an make it better
I've added a pre-supported STL for resin printers. This came out much better than my first print so I saved then with the supports if that's useful to you, though it prints slowly because they are hanging vertically.| Inner_Ring.stl | 861.4KB | |
| Outer_Ring.stl | 1.5MB | |
| Resin-pre-supported.stl | 4.7MB | |
| Soundcore_Q30_Arm.step | 827.5KB |
