Sorting Hat Button 3D Printer Model
The file 'Sorting Hat Button 3D Printer Model' is (stl) file type, size is 859.1KB.
The file 'Sorting Hat Button 3D Printer Model' is (stl) file type, size is 859.1KB.
"Yes, let's stick all the potentially problematic children in a dungeon under the castle and regard them with constant suspicion. Nothing will go wrong from this."
I'm a big fan of using natural indentations in the model to make button holes out of, but in this particular case when it got down to around 20mm the holes were small even for thread. Included some 4 hole models to give a variety.
I recommend printing around .08 to maintain details, especially when getting to the smaller diameter buttons. Also recommend printing with about 30% infill or 3 walls to keep it structurally sound if you plan on using it for actual clothing. If it won't see much use you can certainly get by with less infill/fewer walls.
I really enjoy making these so if anyone has any requests please feel free to let me know and I'll see what I can make!
| Sorting-Hat_4hole_20mm.stl | 338.8KB | |
| Sorting-Hat_4hole_25mm.stl | 338.8KB | |
| Sorting-Hat_4hole_30mm.stl | 338.8KB | |
| Sorting-Hat_4hole_35mm.stl | 338.8KB | |
| sorting_hat_button_3dbuilder_ridged_edge_20mm.stl | 528.6KB | |
| sorting_hat_button_3dbuilder_ridged_edge_25mm.stl | 296.6KB | |
| sorting_hat_button_3dbuilder_ridged_edge_30mm.stl | 296.6KB | |
| sorting_hat_button_3dbuilder_ridged_edge_35mm.stl | 528.6KB |
