I decided to make some custom Christmas Ornaments with the name of our rescued pet pigeon Sophie’s on/in it.

I however did not stop there and decided to make a lot more of them with names of our friends, family and Sophie’s online friends at her X page and her Instagram, plus a specific design for her 'dog friends'

There are currently three designs, The Dog Themed one (this one), an Classic Ornament and one with a Bow .

TIP: On Sophie's project page for this ornament you can also find other ornaments we've made for her and many other names :)

There is also a blank ornament you can use to add your own name(s) to it.

The names which are in this Bow Ornament Design:
Lexy & Flip

LICENSE/REMIX/RE-PUBLISH NOTE:
It is not allowed to re-publish it as 'remix' with more names, you can of course make one for yourself, your friends, family or even your pets, but PLEASE respect the license and don't start re-posting my design with 'dozens of names'. Simply because 1: the license doesn't allow it, and secondly: There is no need to flood thingiverse with dozens of these ornaments :)

3D Print Information
Recommended Layerheight: 0.2mm
Adhesion: None or Brim (outside only)
Orientation: As in file
Recommended Material: PLA
Estimated Print Time: About 2 hours and 30 minutes average
Estimated Required Filament: About 5.15m average

NOTE: The print time and required filament are depending on the name in the ornament, on average its about 2 hours and 35 minutes for each ornament

Additional 3D Printing tip
If you want to paint them, then I would recommend you to print them in PLA White. Simply because this (most of the time) gives the best color results when you paint them.

Video of the ornaments printed in one of Sophie's Pigeon Vlogs:
https://www.youtube.com/shorts/XyMS7o2fjw8

You can also find Sophie (The Pigeon) on her own social media pages:
Instagram, X (Formerly Twitter), TikTok and on her own Blog/Website