Sony Nex-3N Extended Base Grip Plate 3D Printer Model
The file 'Sony Nex-3N Extended Base Grip Plate 3D Printer Model' is (stl) file type, size is 34.3KB.
The file 'Sony Nex-3N Extended Base Grip Plate 3D Printer Model' is (stl) file type, size is 34.3KB.
I went and bought Sony Nex 3N. It is so tiny. While the size and portability is part of the reason I got it, its really is hard to hold and handle for my long slender hands.
I needed a grip and found only one model that was made by the community for it. But that model really was not something I liked so I remixed it. Cut it half the size and added smaller insets for possible padding/rubber grip area for better grip to the camera body. The depth of those insets/cutouts is 1.5mm. Fits a basic mousepad that you can cut into shape and glue upside down to use the rubber bottom of the mouse pad. Or what ever, use hotglue if you ghetto enough :D.
Can be attached by 1/4" screw. I use a hotshoe bolt/screw thingy, but I designed hole to be wider until halfpoint of the height of the model, then tighter from there so a regular screw/bolt can be used and fastened. Maybe like 20mm long.
When printing, fuzzy skin highly recommended. It adds a nice texture and more grip. Additional grip for whole camera and extended grip can be added with Hockey stick tape.
| Nex3NBaseMinimal.stl | 103.6KB |
