Sony ID7000 Replacement Door 3D Printer Model
The file 'Sony ID7000 Replacement Door 3D Printer Model' is (stl) file type, size is 765.6KB.
The file 'Sony ID7000 Replacement Door 3D Printer Model' is (stl) file type, size is 765.6KB.
A replacement door for the Sony ID7000.
This door incorporates a sliding window that can be opened to access the tube/plate holder area.
Designed and made because of the setup FCCF has with the ID7000 where it was impractical to always open the massive door.
There are many parts that fit together very precisely and are possible screwed together using 4/40 screws and 10/32 screws for the side window halves. Most things do not require glue since they should click into place, however since this print is complex, some glue may be needed for your print.
Reuploaded files due to file conflicts
| Sony_door12-Cover_Strip.stl | 6.1KB | |
| Sony_door12-Cover_Strip_2.stl | 18.7KB | |
| Sony_door12-Cover_Strip_3.stl | 3.8KB | |
| Sony_door12-Door.stl | 437.2KB | |
| Sony_door12-Door_Handle.stl | 27.6KB | |
| Sony_door12-Interlock.stl | 41.7KB | |
| Sony_door12-Lower_Corner.stl | 476.1KB | |
| Sony_door12-Lower_Left_Side.stl | 220.3KB | |
| Sony_door12-Right_lower_side.stl | 394.4KB | |
| Sony_door12-Right_upper_side.stl | 447.3KB | |
| Sony_door12-Slice.0.stl | 256.5KB | |
| Sony_door12-Slice.1.stl | 202.0KB | |
| Sony_door12-Upper_Corner.stl | 375.3KB | |
| Sony_door12-Upper_Left_Side.stl | 193.6KB |
