Want to hang your SONOS PLAY 1 high on a wall but can't find a proper mount, well this should be your thing. Mounted the SONOS upside down so the "ugly" bottom side is not visible and cables can be mounted out of view. The speakers are at an angle for better sound stage and the controls are still accessible from the bottom in case you want to manually control volume or play-pause. The horizontal axis can be freely adjusted.
Screws used are hex head, 1/4-20 x 1/2
There are two versions of the mount STL file, one with opening for the RJ45 cable the other without. Since I wanted to keep as much material as possible for strength I kept the opening to a minimum making it necessary to remove the mount in order to unclip the RJ45 connector.
There are also two versions of the wall STL file, one with a "anti theft" lock design which you will only be able to mount / unmount the speaker be loosening the screw. The other you can simply lift the speaker off.
I hope you enjoy and please make sure to read the printing tips and check your layer strength before mounting your speakers. I will not take any responsibility for speakers falling from your wall!
| Sonos_play_1_mount.stl | 1.3MB | |
| Sonos_play_1_RJ45_mount.stl | 1.7MB | |
| Sonos_play_1_wall.stl | 1.1MB | |
| Sonos_play_1_wall_lock.stl | 1.1MB |
