Although the AR Wing Pro is a fantastic plane, the Options to mount a GoPro or other Action cams on it is a bit too sketchy for most of us. So I decided to create Camera Mounts that will fit into the Nose of the AR Wing Pro with a perfect fit and without messing with the original shape. No cutting or modifications on the Fuselage needed.

All mounts will come in a permanent version to be glued in and a 3M Dual Lock version where you can use the 3M Dual Lock (Mechanical Velcro) under the mount to get it mounted very safely but still be able to remove it to switch between cams or stock noses.

The Dual Lock compatible versions lift the cameras 5.5mm up to get the clearance by keeping the mount nice and flush in the fuselage. Don't use a full Dual Lock as it will be hard to remove otherwise.

Print in medium or soft TPU. The loop over the cam lens will hold the cam down tight. Just push forward to insert or release the camera.

Each Mount is available with a Flat angle and a 7° down tilt for more ground view, as well as a glue in and a Dual Lock mount version.

I will update this Thingi Page to add more Mounts over time.

Available Mounts for now:

• GoPro Hero 5, Hero 6, Hero 7
• GoPro Hero Session 4, Session 5 (Should also fit Runcam 5 and other cube cams with same size)
• GoPro Naked Version from BetaFPV

Thanks to Artur for letting me use his pictures and testing the Session Mount. His thingi Page https://www.thingiverse.com/art_fpv/designs