Hi @ all,
here is my take on a Son Goku night light.
What you need:
6x M3 Nut (Maybe 7 if you want a cable holder or something in the bottomcase)
2x M3x10 Screw
4x M3x16 Screw
1x Switch like this one: http://www.ebay.de/itm/Druckschalter-Schalter-Ein-Aus-Einbauschalter-OFF-ON-12-mm-rund-blau-1261-/322241676368?hash=item4b0719c450:g:k~IAAOSwaB5XwJXI
1x 12V power supply
1x cable tie
Also LED-stripes, drilling machine, wires and everything else for soldering.
You have to print Son Goku with 0% infill to get wires in!
You also have to adjust the shell thickness, if its to thin it could easily break.
Drill a hole in hands and feet (i draw a little hole for the position)
| Ball_Bottom.STL | 329.7KB | |
| Ball_Top.STL | 385.1KB | |
| Bottom.STL | 48.1KB | |
| Bottomcase.STL | 290.4KB | |
| Goku_Lamp.STL | 92.4MB |
