Solidoodle X-carriage And New Printable Extruder Assembly. 3D Printer Model
The file 'Solidoodle X-carriage And New Printable Extruder Assembly. 3D Printer Model' is (STL) file type, size is 1.2MB.
The file 'Solidoodle X-carriage And New Printable Extruder Assembly. 3D Printer Model' is (STL) file type, size is 1.2MB.
This is for advanced users only, I will not be providing detailed instructions on assembly at this point, as it is Version 1.0 and requires wider testing then just me. I built this for my Solidoodle 3, and I am fairly sure it will works on a Solidoodle 2 but need confirmation.
This is a printable replacement for the Solidoodle x-axis carriage and extruder assembly. This uses few pieces and offers more precise and permanent adjustment of the rear pinch blocks for the x-axis carriage. With this carriage assembly I am reliably printing at 100mm/s and fast moves are going at 120mm/s I have not tested higher speeds yet. I am looking forward to any constructive critasism that may be given too me.
I have also included a dimensioned drawing of the carriage extruder area, I know the numbers are a little odd, but there are some tight spaces in the extruder assembly.
Let me know if you find any issues or need a hand at getting it working properly in this thread at soliforum.
http://www.soliforum.com/topic/2311/entirely-new-printable-extruder-and-xcarriage-assembly/
| NL-Extruder_Carriage.STL | 1.0MB | |
| NL-Extruder_Tensioner.STL | 337.3KB | |
| NL-Extuder_Base.STL | 1.1MB | |
| NL-Extuder_Base_-_No_wire_Holder.STL | 1015.2KB | |
| NL-Extuder_Carriage_block.STL | 145.3KB |
