UPDATE
added support fir easier printing of fan shroud
UPDATE
corrected dimensions on e3d parts, the fins on the heat sink were incorrect.
haven't printed it out yet, but hoping it will work.
the Solidoodle x sled only represents the part but is not the part, i did basic measurements that were needed and made it represent the part.
let me know if you try it, i haven't received my e3d legends pack yet.
will need a bowden extruders for this. let me know what extruder works for you guys i was thinking of using http://www.thingiverse.com/thing:41502
BOM
9 SHCS M3 bolts
3 m3 nuts
2 bowden extuders (and parts needed for them)
1 e3d cyclops or chimera
1 30 mm fan plus plus the one that comes with the cyclop or chimera
| Chimera_-_0.30-NOZZLE-175-1.STL | 384.2KB | |
| Chimera_-_0.30-NOZZLE-175-2.STL | 384.2KB | |
| Chimera_-_cooler_block_cy_ch-1.STL | 214.7KB | |
| Chimera_-_HeatBlock-1.STL | 53.0KB | |
| Chimera_-_HeatBlock-2.STL | 53.0KB | |
| Chimera_-_Kraken_HeatBreak-1.STL | 289.5KB | |
| Chimera_-_Kraken_HeatBreak-2.STL | 289.5KB | |
| Chimera_-_socket_button_head_cap_screw_am-1.STL | 118.8KB | |
| Chimera_-_socket_button_head_cap_screw_am-2.STL | 118.8KB | |
| Chimera_-_socket_set_screw_cup_point_am-1.STL | 26.7KB | |
| Chimera_-_socket_set_screw_cup_point_am-2.STL | 26.7KB | |
| Chimera_-_socket_set_screw_cup_point_am-3.STL | 26.7KB | |
| Chimera_-_socket_set_screw_cup_point_am-5.STL | 26.7KB | |
| Cyclop_-_cooler_block_cy_ch-1.STL | 214.7KB | |
| Cyclop_-_cyclops_heater_block-1.STL | 137.7KB | |
| Cyclop_-_cyclop_nozzel-1.STL | 52.4KB | |
| Cyclop_-_Kraken_HeatBreak-1.STL | 289.5KB | |
| Cyclop_-_Kraken_HeatBreak-2.STL | 289.5KB | |
| Cyclop_-_socket_button_head_cap_screw_am-2.STL | 155.6KB | |
| Cyclop_-_socket_set_screw_cup_point_am-1.STL | 25.8KB | |
| Cyclop_-_socket_set_screw_cup_point_am-2.STL | 25.8KB | |
| Cyclop_-_socket_set_screw_cup_point_am-3.STL | 30.6KB | |
| e3d_to_solidoodle_4_-_30mmFan-1_30mm_Fan_Blade-1.STL | 199.5KB | |
| e3d_to_solidoodle_4_-_30mmFan-1_30_Fan_Housing-1.STL | 258.5KB | |
| e3d_to_solidoodle_4_-_30mmFan-2_30mm_Fan_Blade-1.STL | 199.5KB | |
| e3d_to_solidoodle_4_-_30mmFan-2_30_Fan_Housing-1.STL | 258.5KB | |
| e3d_to_solidoodle_4_-_fan_mount-3.STL | 235.6KB | |
| e3d_to_solidoodle_4_-_socket_head_cap_screw_am-1.STL | 78.6KB | |
| e3d_to_solidoodle_4_-_socket_head_cap_screw_am-2.STL | 78.6KB | |
| e3d_to_solidoodle_4_-_socket_head_cap_screw_am-3.STL | 78.6KB | |
| e3d_to_solidoodle_4_-_socket_head_cap_screw_am-4.STL | 72.2KB | |
| e3d_to_solidoodle_4_-_socket_head_cap_screw_am-5.STL | 72.2KB | |
| e3d_to_solidoodle_4_-_socket_head_cap_screw_am-6.STL | 72.2KB | |
| e3d_to_solidoodle_4_-_socket_head_cap_screw_am-7.STL | 72.2KB | |
| e3d_to_solidoodle_4_-_socket_head_cap_screw_am-8.STL | 72.2KB | |
| e3d_to_solidoodle_4_-_socket_head_cap_screw_am-9.STL | 72.2KB | |
| e3d_to_solidoodle_4_-_solidoodle_4_X_axis-1.STL | 36.8KB | |
| e3d_to_solidoodle_4_-_solidoodle_mount-1.STL | 112.1KB |
