This is a Solar-powered wireless weather station by using an ESP32 Wifi Module and few common weather sensors available in the market.

Full Project is available on Instructables:

https://www.instructables.com/Solar-Powered-WiFi-Weather-Station-V30/

Credit: This enclosure is designed by my friend Glen Lewis

Update:05.04.2021:

For modifications, you can download the STEP files from GRABCAD

Components Used:

1. ESP32 Dev Kit V1- 30 Pins ( Aliexpress / Banggood )

2. TP4056 ( Aliexpress / Banggood )

3. Barometric Pressure sensor BME280 ( Amazon / Banggood )

4. Temperature Sensor - DS18B20 ( Amazon / Banggood )

5. UV Index Sensor - GY1145 ( Amazon / Banggood )

6. Lux Level Sensor - BH1750 ( Amazon / Banggood )

7. Wind & Rain Sensor ( Amazon / Sparkfun )

8. MCP1700-3.3V ( Amazon)

9. Resistors - 2 x 1K, 1 x 10K, 3 x 4.7K, 1 x 27K, 1 x 100K ( Amazon / Banggood )

10. Electrolytic Capacitor - 1 x 100uF ( Amazon / Banggood )

11. Ceramic Capacitors - 4 x 0.1uF ( Amazon / Banggood )

12. TVS Diode - DT1042-04SO ( Amazon ) - Optional

13. RJ11 Connector ( Aliexpress )

14. Male / Female Headers ( Amazon / Banggood )

15. Jumper Cap ( Amazon / Banggood )

16. Screw Terminal-2P - 5.08mm pitch ( Amazon / Banggood )

17. Screw Terminal -3P -3.5mm pitch ( Sparkfun )

18. Solar Panel - 5V / 1.2Watt ( 110 x 69 mm ) - ( Amazon / Aliexpress / Banggood )

19. 18650 Battery ( Banggood )

20. 8650 Battery Holder ( Amazon / Banggood )

21. 22 AWG Wires ( Amazon / Banggood )

22. Jumper Wires M-F( Amazon / Banggood )

23. Slide Switch ( Amazon / Banggood )

24. PCB ( PCBWay )

Tools Used:

1. Soldering Iron ( Amazon / Banggood )

2. Nipper ( Amazon / Banggood)

3. Wire Stripper ( Amazon / Banggood)

4. 3D Printer ( Amazon / Banggood)

Link: https://grabcad.com/library/stevenson-screen-v3-for-open-green-energy-1