SOLAR POWERED WIFI WEATHER STATION V2 3D Printer Model
The file 'SOLAR POWERED WIFI WEATHER STATION V2 3D Printer Model' is (ino,stl) file type, size is 331.4KB.
The file 'SOLAR POWERED WIFI WEATHER STATION V2 3D Printer Model' is (ino,stl) file type, size is 331.4KB.
20190101: Update - New .ino file & new QR Code
This is the basic of my build:
https://www.instructables.com/id/Solar-Powered-WiFi-Weather-Station/
https://www.thingiverse.com/thing:2282869
Wire Diagramm (Credit to the Austrian)
I make a new Housing, write parts of the code new :)
Works with the APP Blynk
Actually Setup:
1x Wemos D1 mini PRO
https://de.aliexpress.com/item/1PCS-D1-mini-Pro-16M-bytes-external-antenna-connector-ESP8266-WIFI/32803725174.html?spm=a2g0s.9042311.0.0.30024c4dou9RgR
To do:
Bridge RST and D0 (for Deep Sleep)
200k Ohm Resistor between A0 and 5V (for battery voltage measurment)
Bridge the ext. antenna resistor (picture)
The Arduino Ino is in downloads - You have to create a key on the app and enter your
Wi-Fi data.
1x TP4056 Power Board
1x 18650 single holder
https://de.aliexpress.com/item/High-Quality-18650-Battery-Box-Holder-Batteries-Case-for-4pcs-18650-in-Parallel-3-7V-Pole/32814062027.html
2x Shottky Diodes
https://de.aliexpress.com/item/50Pcs-1N5819-5819-1A-40V-SCHOTTKY-DIODE-NEW/32216810320.html
Wires, Solder etc...
The APP:
https://www.blynk.cc/ - load the App and Scan the QR Code to get the project.
You have to change the language.
Print the Housing - i use PETG
Have Fun!
20181008: Update the Arduino File
20181009: Update the Arduino File
| 20190101_Weather_Stevetecx.ino | 3.9KB | |
| Housing.stl | 5.1MB | |
| SolarMount.stl | 20.3KB |
