SOLAR POWERED WIFI WEATHER STATION 3D Printer Model
The file 'SOLAR POWERED WIFI WEATHER STATION 3D Printer Model' is (ino,stl) file type, size is 82.5KB.
The file 'SOLAR POWERED WIFI WEATHER STATION 3D Printer Model' is (ino,stl) file type, size is 82.5KB.
20190101: Update - New .ino file & new QR Code
This is the basic of my build:
https://www.instructables.com/id/Solar-Powered-WiFi-Weather-Station/
https://www.thingiverse.com/thing:2282869
I make a new Housing, write parts of the code new :)
Works with the APP Blynk
20180922 UPDATE:
After a few weeks i have problems with the wemos battery shield + Solar.
The better solution is the TP4056 Power Board - look at the Wire Diagramm (Credit to the Austrian)
Actually Setup:
1x Wemos D1 mini
https://de.aliexpress.com/item/ESP8266-ESP-12-ESP12-WeMos-D1-Mini-Module-Wemos-D1-Mini-WiFi-Development-Board-Micro-USB/32644199530.html
To do:
Bridge RST and D0 for Deep Sleep
200k Ohm Resistor between A0 and 5V
The Arduino Ino is in downloads - You have to create a key on the app and enter your
Wi-Fi data.
1x TP4056 Power Board
1x 18650 single holder
https://de.aliexpress.com/item/High-Quality-18650-Battery-Box-Holder-Batteries-Case-for-4pcs-18650-in-Parallel-3-7V-Pole/32814062027.html
2x Shottky Diodes
https://de.aliexpress.com/item/50Pcs-1N5819-5819-1A-40V-SCHOTTKY-DIODE-NEW/32216810320.html
Wires, Solder etc...
The APP:
https://www.blynk.cc/ - load the App and Scan the QR Code to get the project.
You have to change the language.
Print the Housing - i use PETG
Have Fun!
| 20190101_Weather_Stevetecx.ino | 3.9KB | |
| SolarBase.stl | 320.2KB | |
| SolarCellPlate.stl | 17.9KB |
![Air Purifier [Deckman|Scalar] Covid-19 3D Printer Model](https://res.3axis.co/ea5dca1e-a36e-4c80-b288-3c8888517488/images/0cd184fc-24fe-4b9c-b551-9ee93566178e_thumb.jpg)