Solar Charger 3D Printer Model
The file 'Solar Charger 3D Printer Model' is (stl) file type, size is 74.0KB.
The file 'Solar Charger 3D Printer Model' is (stl) file type, size is 74.0KB.
This is a charger stand for a solar panel with a surface area of 13 x 15 cm. The stand is made up of 4 pieces. These pieces consist of a mount, on which the panel and its cover are placed (they are secured using glue), a foot and a small support beam.
In this project I have soldered a USB cable to the panel to charge devices.
It is appropriate to solder a diode to prevent battery current return, in case there is not enough light for the panel. In my case I used an ST4148 diode that I had on hand, although there are better options.
Necessary materials:
• Solar panel 13 x 15 cm. (Link: https://es.aliexpress.com/item/32906698984.html)
• M4x20 screws and M4 nuts.
• USB cable (or another type if you prefer).
• Anti-reverse diode (ST4148 or others).
TIP: Use glue to join the two parts of the case, as if it were a sandwich with the panel in the middle.
BONUS TIP: To protect the panel from bumps and scratches, I have placed a transparent plastic in the middle of the sandwich, which I have recycled from a box that I had at home. This is not necessary, but I would like to leave the idea as an extra contribution.
| Base_panel.stl | 52.2KB | |
| Pe_de_base.stl | 98.0KB | |
| Poste_simple.stl | 96.0KB | |
| Tapa.stl | 81.3KB |
