A soda Caddy for the standard 12 Pack boxes of soda. Made for a standard 12 FL OZ aluminum can. Made in multiple parts that should print on any printer with a build area capable of printing 6" x 4" (152.4mm x 101.6mm). Will need gluing once printed. I have a large format version which prints the entire setup at 8" x 18" if you have a printer that can print that big (zipped File). Again this is not tested but it should be good as a soda can is fairly standard now.
| SFP_-Back_Wall_Top.stl | 3.8KB | |
| SFP_-_Bottom_Ramp_1.stl | 18.6KB | |
| SFP_-_Bottom_Ramp_2.stl | 12.0KB | |
| SFP_-_Bottom_Ramp_3.stl | 6.3KB | |
| SFP_-_LP.zip | 50.1KB | |
| SFP_-_L_Wall_Bottom_1.stl | 31.7KB | |
| SFP_-_L_Wall_Bottom_2.stl | 31.7KB | |
| SFP_-_L_Wall_Bottom_3.stl | 12.4KB | |
| SFP_-_L_Wall_Top_1.stl | 34.1KB | |
| SFP_-_L_Wall_Top_2.stl | 28.2KB | |
| SFP_-_L_Wall_Top_3.stl | 7.5KB | |
| SFP_-_R_Wall_Bottom_1.stl | 38.0KB | |
| SFP_-_R_Wall_Bottom_2.stl | 38.0KB | |
| SFP_-_R_Wall_Bottom_3.stl | 18.6KB | |
| SFP_-_R_Wall_Top_1.stl | 40.3KB | |
| SFP_-_R_Wall_Top_2.stl | 34.5KB | |
| SFP_-_R_Wall_Top_3.stl | 13.8KB | |
| SFP_-_Top_Ramp_1.stl | 5.7KB | |
| SFP_-_Top_Ramp_2.stl | 5.4KB | |
| SFP_-_Wall_Peg.stl | 684.0B |
