Soda Can Shipping Containers 3D Printer Model
The file 'Soda Can Shipping Containers 3D Printer Model' is (stl) file type, size is 2.5MB.
The file 'Soda Can Shipping Containers 3D Printer Model' is (stl) file type, size is 2.5MB.
This is a project I designed when I was teaching myself how to use Autodesk Fusion 360 and how to make use of parameter modeling.
The goal was to design an object that would fit any size of Soda can from a small 250ml Red Bull Can to a 350ml Coke Can and above where the model dimensions would automaticly adjust to fit the can when entered in the parameters list.
I designed a Liquids Shipping container where the can formed the central cylindrical tank, and which could be assembled with the can pre-painted to make finishing easier.
I've included files here for three different sizes of can; the 250ml "Red Bull" can, the old 350ml "Squat Coke Can" and the newer 350ml "Tall Coke Can".
Due to the size of the printer I have avaiable I've only printed for the 250ml sized can so far but those with a larger printed bed should be able to print for the larger sized cans.
This is a V1 of the design with minimal texturing or additional details. Fell free to modify the files as required or let me know if there is a specific size of can I can test my models parameters for.
| 250ml_Bottom_Cross_Brace.stl | 551.8KB | |
| 250ml_Dome_End_Cap.stl | 649.1KB | |
| 250ml_Tab_End_Cap.stl | 268.2KB | |
| 250ml_Top_Cross_Brace.stl | 962.1KB | |
| 350ml_Squat_Bottom_Cross_Brace.stl | 561.2KB | |
| 350ml_Squat_Dome_End_Cap.stl | 660.4KB | |
| 350ml_Squat_Tab_End_Body.stl | 263.1KB | |
| 350ml_Squat_Top_Cross_Brace.stl | 971.5KB | |
| 350ml_Tall_Bottom_Cross_Brace.stl | 549.5KB | |
| 350ml_Tall_Dome_End_Cap.stl | 643.3KB | |
| 350ml_Tall_Tab_End_Body.stl | 267.4KB | |
| 350ml_Tall_Top_Cross_Brace.stl | 958.9KB |
