Soda Can Coin Bank Slot Cover From Aluminoids.com 3D Printer Model
The file 'Soda Can Coin Bank Slot Cover From Aluminoids.com 3D Printer Model' is (STL) file type, size is 1.0MB.
The file 'Soda Can Coin Bank Slot Cover From Aluminoids.com 3D Printer Model' is (STL) file type, size is 1.0MB.
Transmogrify soda cans into cool-looking coin banks!
From aluminoids.com, this simple plastic cover turns your ordinary soda can into an intriguing and useful art display. It's an eye-catching tool for encouraging donations to your next fundraiser or for just collecting your spare change. It fits most U.S. coins and folded bills.
To apply it, first drain a soda can by popping a hidden hole in it -- leaving the top intact. Use wood screws, 1/8th inch pop-rivets, or superglue to lock the cover in place just a few millimeters below the outer rim of the can. Then use a pushpin to poke many, many holes all around the inner edges of the slot. Then use a knife tip around the inner edge to fully knock-out the coin-hole. The slot covers are dimensioned to fit 355 ML cans prevalent in the U.S. and Canada.
To see videos and more detailed instructions demonstrating how to apply this to a can, click the coin bank image on my "Designs" page at aluminoids.com.
The updated version of this coinslide is here: https://www.thingiverse.com/thing:4758860
| coinslotmaker.STL | 684.0B | |
| coinslotmaker_2.STL | 684.0B | |
| coin_bank_cover_for_screws.STL | 60.5KB | |
| coin_bank_for_rivets.STL | 25.5KB | |
| fifth_coin_slot.STL | 18.8KB | |
| fifth_coin_slot_2.STL | 18.8KB | |
| first_coin_slot.STL | 7.5KB | |
| first_coin_slot_2.STL | 7.5KB | |
| form_for_spiral_coinslide_3.STL | 619.1KB | |
| fourth_coin_slot.STL | 57.8KB | |
| fourth_coin_slot_2.STL | 57.8KB | |
| new_coin_slot_with_puncturing_tip.STL | 192.5KB | |
| second_coin_slot.STL | 22.9KB | |
| second_coin_slot_2.STL | 22.9KB | |
| sixth_coin_slot.STL | 73.1KB | |
| sixth_coin_slot_2.STL | 73.1KB | |
| spiral_coinslide.STL | 1.3MB | |
| third_coin_slot.STL | 24.6KB | |
| third_coin_slot_2.STL | 24.6KB |
