This project came about after a long period of suffering. We bought an IKEA soap holder 20 years ago, but it had since broken and we had to make do with temporary solutions. The soap always softened quickly, the soap dripped onto the edge of the tub, and the holes in the soap holder kept getting clogged.
This project must be adapted for the respective wall mount!
It has the following features:
-Drainage grooves instead of holes.
-Slope forward to drain the liquid in a controlled manner.
-Slanted drip edge to allow the drained water to drip off in a defined manner.
-Cams that hold the soap.
The effect:
The soap liquid no longer drips onto the edge of the tub but into the tub. The soap remains usable for a long time and does not get soaked.
Object can be printed in two versions: 2xHalfes for easy print (glue it together), 1 Model for printing-heroes :-). For Adaption i stored the Fusion 360 Model.
| Seifenhalter.f3d | 505.0KB | |
| Seifenhalter2.stl | 1.3MB | |
| Seifenhalter2a.stl | 1.2MB | |
| Seifenhalter2b.stl | 140.3KB |
