Yet another snowflake :) now similar as cryo sign from Genshin Impact game.
2mm height
nozzle 0.6,
print at 80/40mm/s,
nozzle 210°C,
bed 60°C,
step layer height 0.20mm.
Better use cura's concentric infill if needed
(i have some warping because bed is not plane)
after many (many) attempts a came to these params at 0.6 nozzle for esun blue transparent glass PLA:
0.2mm layer height
first layer at 10mm/s
nozzle temp 215°C
speed 50mm/s
fan 100% at 3rd layer
retract 5mm at 40mm/s
//you can adjust the height by zooming via Z axis only in slicer (i use cura)
| flakeGenshin_2mm.stl | 86.6KB |
