Nice big floaty skis for 1/10 Traxxas 2wd. The skids are about 2" (50mm) x 6" (150mm) not counting the kick ups. Risers are sized for Slash tire size, Rustler and Bandit conversions will have the front sitting a bit higher than stock which is probably a good thing if snow is deeper than 1". Mounts to the stock C hub with stock hardware. All parts are fully reversible for left and right so if you bust a hub mount or riser if you print an extra it'll replace either side. All hardware is M3, 18mm for the rearward hub/riser holes, 15 for the forward. The skids and keels attach with 10mm screws. There are loops to add rubber bands to keep skis from diving forward in the air.
So that's M3 18mm x4, 15mm x4, 10mm x12.
Enjoy and keep your hands warm!
| SkiKeel.stl | 29.6KB | |
| SkiKnuckle.stl | 474.5KB | |
| SkiRiser.stl | 495.6KB | |
| SkiSkid.stl | 670.3KB |
