Snow Melting Tool. 3D Printer Model
The file 'Snow Melting Tool. 3D Printer Model' is (stl) file type, size is 71.9MB.
The file 'Snow Melting Tool. 3D Printer Model' is (stl) file type, size is 71.9MB.
A spoon that I have designed to spread road salt. It can also be used to spread seeds of all kinds. It can actually be used to spread anything, just it can get out in through the holes.
It comes in four different designs. A short and long version. I made the short one as I could only just exactly have the spoon on the bed and not everyone has a printer that can print over 300 mm. The long one is 300.5 mm between the two farthest points and the short one 214 mm. Because it was so long I had to place the spoon close to 45 ° for it to fit on the bed.
And in 1mm and 2.5mm wall thickness. I did not expect that 1 mm was enough when using it for salt.
Have fun!
| Spoon_01_1.stl | 37.9MB | |
| Spoon_01_2.5.stl | 44.3MB | |
| Spoon_02_1.stl | 38.2MB | |
| Spoon_02_2.5.stl | 44.6MB |
