It's almost Christmas, so bring out the Snow Globes! This one combines MakerBot 3D Printing with littleBits Electronics.
It's a long but rewarding project! The electronics are really simple to work with and are housed in the base of the globe. Give us a shout if you run into any issues!
Video Link: https://youtu.be/yIq1SI4NSpM
Details of any non-3D Printed parts that are required are listed at the bottom of the page.
Print the following parts:
In True White:
1 x Lower_Base.STL
1 x Upper_Base.STL
4 x Foot.STL
In True White and True Black:
1 x MBT_Logo.STL
N.B. Print the MBT_Logo.STL in True White filament, set the pause height to 4mm, then change to True Black filament.
In Light Brown:
1 x House.STL
In True Brown:
1 x Roof_Porch.STL
1 x Roof_1.STL
1 x Roof_2.STL
1 x Roof_3.STL
1 x Roof_4.STL
1 x Side_Roof_1.STL
1 x Side_Roof_2.STL
1 x Pier.STL
In Army Green or True Green:
2 x Tree_1.STL
2 x Tree_2.STL
N.B. Print the Trees without Supports to get the full effect!
In Translucent Green:
1 x Holly_LHS.STL
1 x Holly_RHS.STL
In Translucent Red:
1 x Push_Button.STL
In Translucent Blue:
1 x Lake.STL
In Translucent Yellow:
1 x Door_Front.STL
Please leave your comments and suggestions! We'd love to hear them.
Designed by the MakerBot UK Team - Sachin and Jonathan
| Door_Front.STL | 2.6KB | |
| Foot.STL | 253.7KB | |
| Holly_LHS.STL | 2.9MB | |
| Holly_RHS.STL | 2.9MB | |
| House.STL | 670.5KB | |
| Lake.STL | 3.0MB | |
| Lower_Base.stl | 1.7MB | |
| MBT_Logo.STL | 502.8KB | |
| Pier.STL | 142.3KB | |
| Push_Button.STL | 737.9KB | |
| Roof_1.STL | 619.4KB | |
| Roof_2.STL | 742.2KB | |
| Roof_3.STL | 538.6KB | |
| Roof_4.STL | 385.9KB | |
| Roof_Porch.STL | 265.6KB | |
| Side_Roof_1.STL | 524.5KB | |
| Side_Roof_2.STL | 505.8KB | |
| Tree_1.STL | 2.1MB | |
| Tree_2.STL | 1.8MB | |
| Upper_Base.stl | 13.2MB |
