Description

Hello there!

A simple idea, but one that I’m sure will delight many! Keycaps inspired by the buttons of the Super NES!

What type of switches are these keycaps for?

There are different keycaps for different switches.

• MX Stem:
  • 1.59 x 1.59 x 4.7mm (Xbtn1.59x4.7.stl, Abtn1.59x4.7.stl, Bbtn1.59x4.7.stl, and Ybtn1.59x4.7.stl)
• Smaller dimensions:
  • 1.33 x 1.33 x 4.5mm (Xbtn1.33x4.5.stl, Abtn1.33x4.5.stl, Bbtn1.33x4.5.stl, and Ybtn1.33x4.5.stl)

And for which key?

They aren’t modeled for a specific key, but it’s preferable to use them on the directional arrows, though you are free to choose.

Contents

1.33x4.5:

• Xbtn1.33x4.5.stl
• Abtn1.33x4.5.stl
• Bbtn1.33x4.5.stl
• Ybtn1.33x4.5.stl

1.59x4.7:

• Xbtn1.59x4.7.stl
• Abtn1.59x4.7.stl
• Bbtn1.59x4.7.stl
• Ybtn1.59x4.7.stl

Hollow (keycaps without stems):

• XbtnHollow.stl
• AbtnHollow.stl
• BbtnHollow.stl
• YbtnHollow.stl

Dimensions

• 18 x 18 x 8mm

Any problem?

If any of the files don’t suit you, feel free to contact me.

The images are renderings; when you print the model with your printer, the keycap will be colorless. You will need to paint it to achieve a more realistic look.

3D PRINTING SETTINGS

SLA Printing

• Printer: Anycubic Photon Mono X2

• Raft thickness: 2.7mm

• Raft angle: 45

• Bottom exposure: 25s
• Normal exposure: 2.5s
• Off time: 0.5s
• Bottom layers: 5

• Layer thickness: 0.05mm

• Z lift distance: 8mm
• Z lift speed: 2mm/s
• Z retract speed: 3mm/s

• Support: Yes, be careful of print detachment due to the suction effect. I used small supports with my printer.

• Slicer: Anycubic Photon Workshop