SNCB / NMBS 91 shunting locomotive in HO scale 1:87 :
This model was designed with FDM printing in mind but you might have better results with an SLA printer. If printed on an FDM printer, you will need a 0.25mm nozzle (or finer) and layer heights of 0.05mm.
all of the parts should fit together easily and only need a small amount of glue, The model uses two alignment blocks to make sure it remains square.
You will have to print every part once except for the lights (in 3 parts) and the buffers that have to be printed 4 times as well as the breaks that need to be printed twice.
| 91_alignmentBlock.stl |
| 91_bay.stl |
| 91_bayBlock.stl |
| 91_bayTop.stl |
| 91_bottom_L.stl |
| 91_bottom_R.stl |
| 91_buffer.stl |
| 91_cabin.stl |
| 91_exhaustCap.stl |
| 91_grill.stl |
| 91_lightBack.stl |
| 91_lightBlock.stl |
| 91_lightFront.stl |
| 91_tankBot_L.stl |
| 91_tankBot_R.stl |
| 91_tankTopR.stl |
| 91_tankTop_L.stl |
| 91_wheels_L.stl |
| 91_wheels_R.stl |
