Ready to kick those bulky Snapmaker clamps to the curb? Print a few of these low-profile vise-clamps, and mill as small and as close as you like. These clamps measure only 20mm tall, and utilize the hardware already included with your Snapmaker.
Hardware needed for Four clamps:
8 M4 x 30 mm Socket Head Bolts (To secure to the waste-board)
4-8 M4 50 AND/OR 70 mm Socket Head Bolts (the actual clamps)
4-12 M4 Nuts, available at your local hardware store (Press-fit from below)
| CNC-Vise.STL | 148.2KB |
