Snap-On Dial Indicator Fan Mount 3D Printer Model
The file 'Snap-On Dial Indicator Fan Mount 3D Printer Model' is (stl) file type, size is 21.4KB.
The file 'Snap-On Dial Indicator Fan Mount 3D Printer Model' is (stl) file type, size is 21.4KB.
I could not find any mount that fit my particular fan duct setup (see Ender 3/CR-10 FANG Lateral Cooler Remix), so I designed a custom mount for my dial indicator that snaps onto the stock 4010 hotend fan.
It features a custom backplate, mounted in place of the original one. Integrated standoffs allow the hotend fan to breathe during hot leveling and enable the upper indicator stem to clear the fan duct. Flexible tabs ensure a tight fit for reproducible measurements.
Printed in PLA in one piece without supports.
The backplate measures 52mm in outer diameter with a screw distance of 32mm.
Integrated standoffs measuring 9mm.
In the configuration shown in the photos, the measurement point sits 51mm in front of the nozzle center.
| SnapOn-DialIndicator-Holder.stl | 110.6KB |
![[REMIX] Lockable Contour Gauge With Flat Blade 240 Mm 3D Printer Model](https://cdn.3axis.co/assets/7e/d3/d0/d0/7ed3d0d0-76ae-46b8-84a1-49c141fb94b9/images/72f146d2-6ff5-4b6a-8423-db3cd2b20204_thumb.jpg)
