The original was a comb and had an engraving mark on the bottom so I wanted a blade, So I found in remixes a blade. It still had the letters on the bottom so I removed the letters/watermark.
Now its one file with all the pieces you need to print. The original size prints fine, but I thought it was too big so I scaled down to 60% I DO NOT RECOMMEND IT!!! It is a bit too small, so holding it might be weird while flipping. I would say minimum if you are going to scale down would be 70%.
Printing it with the original dimensions should be fine, unless you want it do be a bit smaller.
I printed mine with PLA and it flips just fine.
Read Post Printing on how to assemble.
Update: March, 3 2019 - Added individual files for blade and handle so you can print it in different colors if you like.
| Balisong_complete.stl | 1.1MB | |
| Blade.stl | 4.3MB | |
| Handles.stl | 757.7KB |
