SNAP DICE 3D Printer Model
The file 'SNAP DICE 3D Printer Model' is (stl) file type, size is 348.1KB.
The file 'SNAP DICE 3D Printer Model' is (stl) file type, size is 348.1KB.
Snap-dice: Print the faces and center separately, and then snap them together. No glue needed. 17mm wide.
Each die has 1 mid and 6 faces.
All models already has pre-made supports and rafts.
Layer height 0.2mm
40% infill gives about the same weight as a retail die. Go up to 80% for some extra weight.
The symbols will get the best contrast if the center is of a darker color than the faces.
Content
Blank (use boolean>difference in a 3d modelling software to make your own dice)
Numbers: 0 to -3, 1 to 12, 16, 20, 25, 32, 50, 64
D3: three sided dice
| snap_dice_face_blank.stl | 32.5KB | |
| snap_dice_face_D3_1.stl | 35.4KB | |
| snap_dice_face_D3_2.stl | 38.4KB | |
| snap_dice_face_D3_3.stl | 41.3KB | |
| snap_dice_face_dot1.stl | 34.1KB | |
| snap_dice_face_dot2.stl | 34.5KB | |
| snap_dice_face_dot3.stl | 36.3KB | |
| snap_dice_face_dot4.stl | 37.6KB | |
| snap_dice_face_dot5.stl | 38.0KB | |
| snap_dice_face_dot6.stl | 40.7KB | |
| snap_dice_face_minus1.stl | 36.4KB | |
| snap_dice_face_minus2.stl | 42.1KB | |
| snap_dice_face_minus3.stl | 44.4KB | |
| snap_dice_face_num0.stl | 43.8KB | |
| snap_dice_face_num1.stl | 35.2KB | |
| snap_dice_face_num10.stl | 46.6KB | |
| snap_dice_face_num11.stl | 37.6KB | |
| snap_dice_face_num12.stl | 43.2KB | |
| snap_dice_face_num16.stl | 45.0KB | |
| snap_dice_face_num2.stl | 40.7KB | |
| snap_dice_face_num20.stl | 51.4KB | |
| snap_dice_face_num25.stl | 48.0KB | |
| snap_dice_face_num3.stl | 43.6KB | |
| snap_dice_face_num32.stl | 50.1KB | |
| snap_dice_face_num4.stl | 38.9KB | |
| snap_dice_face_num5.stl | 41.5KB | |
| snap_dice_face_num50.stl | 52.7KB | |
| snap_dice_face_num6.stl | 44.7KB | |
| snap_dice_face_num64.stl | 48.7KB | |
| snap_dice_face_num7.stl | 37.4KB | |
| snap_dice_face_num8.stl | 46.7KB | |
| snap_dice_face_num9.stl | 44.8KB | |
| snap_dice_mid.stl | 105.9KB | |
| snap_dice_mid_no_support.stl | 101.4KB |
