Snakeinplace – Print-in-place And Articulated Puzzle Toy 3D Printer Model
The file 'Snakeinplace – Print-in-place And Articulated Puzzle Toy 3D Printer Model' is (stl) file type, size is 1.6MB.
The file 'Snakeinplace – Print-in-place And Articulated Puzzle Toy 3D Printer Model' is (stl) file type, size is 1.6MB.
I wanted to recreate one of the toys from my childhood but design it as a print-in-place model.
I made two 3d printable versions where one is completely print-in-place and a version where you can snap-fit some colors onto it.
-no support structures
-0,15mm layer height
Subscribe or follow me on
Instagram: https://www.instagram.com/agepbiz/
Twitter: https://twitter.com/agepbiz
This was 3d printed on a Prusa Mini+ using Fillamentum PLA
I recommend printing the “snakeinplace_testpart.stl” first to make sure your printer can handle the clearance between the articulated parts. PLA wears down over time due to friction so the joints might become loose
| inlay.stl | 5.7KB | |
| snakeinplace.stl | 1.9MB | |
| snakeinplace_inlay.stl | 2.1MB | |
| snakeinplace_testpart.stl | 145.7KB |
![Parrot Puzzle Maze: Cloverleaf [Intermediate] 3D Printer Model](https://res.3axis.co/4340ff8c-a06f-4f46-9020-d5514c4f376c/images/204bc401-e443-4f77-a2c8-744e0ac054b8_thumb.jpg)
