Snack Bowl 3D Printer Model
The file 'Snack Bowl 3D Printer Model' is (stl) file type, size is 557.8KB.
The file 'Snack Bowl 3D Printer Model' is (stl) file type, size is 557.8KB.
This is a classic snack bowl and it works quite well. I only work with ELEGOO 3D printers, so if you're using a different brand, I may not be able to help with troubleshooting. However, if you also use an ELEGOO printer, feel free to reach out. I recommend using an infill between 10% and 20% since it’s not meant to be heavy. The height is set to 10.2 cm (4 inches), and the other dimensions adjust automatically based on that, I use 20 cm (7.9 inches). I printed this with PETG, but I also use PLA—I haven’t tried any other plastic types. This was modeled using SelfCAD’s free plan, and there may be a tutorial for it on my YouTube channel, but I’m not sure.
| snack_bowl.stl | 1.3MB |
