This is a case for the SmoothStepper USB produced by Warp9 Tech Design Inc. (http://warp9td.com/).
The picture and models are I think self explanatory. There are points on the sides of the case for cable ties to hold wires attached to the screw terminals if needed.
Note: The lid in the picture has a small error in the flange - that is fixed in the model :)
2016.07.23 - Updated model - As per FiddlerAU suggestion, the bridge parts above the wired connectors have been moved to the lid to allow the connectors to be removed from the board without removing the wires from the connectors. The photos do NOT reflect this change though.
| SmoothStepperUSBBox.stl | 274.9KB | |
| SmoothStepperUSBLid.stl | 83.3KB |
