The file 'Smooth Rolling Filament Holder With Bearings For FLSun V400, Lulzbot Mini, Others 3D Printer Model' is (scad,stl,skp) file type, size is 456.6KB.
Includes STL files and Parameterized OpenScad files. Lulzbot mount adatper in sketchup file.
Parts include:
-- cone holder for bearing (2 required), (filename: cone_and_bearing)
-- FLSun mount adapter to replace the FLSun provided horizontal bar (filename: -- FLSun_V400_spool_mount_adapter)
-- Lulzbot Minit mount adapter (filename Lulzbot_Spoolo_Bracket_Adapter)
-- spacer 6 mm (one required on the axel on the flat side of each cone), filename(spacer)
-- wingnut (scad and stl files included or use standard wingut for your chosen bolt. (filename: Wing_Nut_Nut)
-- optional vertical end support, (filename: end_support_bracket)
Parts required, but not included:
-- Axel required, but not included (5/16-18 bolt, full threaded). I used 5" full threaded bolt, but as you can see from the pics about 3.5" would be long enough for standard size filament spool. Longer axel and the end support optional, useful for larger spools of filament. (available from Amazon ASIN B0D22H8FZK)
-- 2 x 608Z Ball Bearings (available from Amazon ASIN B002BBGTK6)
A 50 mm spacer is also included, but may not be needed, depending on the length of your axel and whether or not it is fully threaaded.
The hole in the optional vertical end support is intentionally undersized. The support piece can be threaded onto the axel (axel will cut threads in the hole). This allows the end support piece to be used without needing a wingnut.
Inspired by thing:257366, but not a remix.
| cone_and_bearing.scad | 402.0B | |
| cone_and_bearing.stl | 37.6KB | |
| end_support_bracket.scad | 619.0B | |
| end_support_bracket.stl | 26.7KB | |
| FLSun_V400_spool_mount_adapter.scad | 1.2KB | |
| FLSun_V400_spool_mount_adapter.stl | 33.7KB | |
| Lulzbot_Spoolo_Bracket_Adapter.skp | 1.1MB | |
| Lulzbot_Spoolo_Bracket_Adapter.stl | 102.7KB | |
| spacer.scad | 381.0B | |
| spacer_50mm.stl | 12.6KB | |
| spacer_6mm.stl | 12.6KB | |
| Wing_Nut.scad | 9.6KB | |
| Wing_Nut.stl | 557.2KB |
