Smarthome Sensor ESPHome 8266 Temp, Humidity, Light, Air Pressure 3D Printer Model
The file 'Smarthome Sensor ESPHome 8266 Temp, Humidity, Light, Air Pressure 3D Printer Model' is (STEP,STL,txt) file type, size is 240.1KB.
The file 'Smarthome Sensor ESPHome 8266 Temp, Humidity, Light, Air Pressure 3D Printer Model' is (STEP,STL,txt) file type, size is 240.1KB.
My Smarthome Roomsensor
Parts:
Wemos D1 mini
BME 280
BH1750
M3x6mm Screw
I Use Home Assistant as Server and ESPHome to control the Sensor
I send the Wemos into deepsleep and wake it every 5min for 30sec (dont forget to connect D0 and RST)
Also take a look at my other designs:
https://www.thingiverse.com/dasmani01/designs
Update 22.01.2021:
I added the .step files so you can modify.
And i added a .txt file with the code.
Update 24.03.2021:
Wemos Pin D1 --> SCL
Wemos Pin D2 --> SDA
Wemos Pin G --> GND
Wemos Pin 3V3 --> VCC
and connect
Wemos Pin D0 --> Wemos Pin RST
| boden_esp8266.STEP | 543.5KB | |
| boden_esp8266_v4.STL | 333.7KB | |
| deckel_esp8266.STEP | 324.5KB | |
| deckel_esp8266_v3.STL | 84.6KB | |
| sensor_wemosD1mini_bme280_bh1750.txt | 819.0B |
