Smart Roadster Cupholder And Stowage Console 3D Printer Model
The file 'Smart Roadster Cupholder And Stowage Console 3D Printer Model' is (stl) file type, size is 9.5MB.
The file 'Smart Roadster Cupholder And Stowage Console 3D Printer Model' is (stl) file type, size is 9.5MB.
V3 of my Centre Console/cupholder.
Be warned... this isn't a pure plug and play - my Roadster interior is scruffy, and has been fiddled around with a lot (before it even came into my ownership). So I can't say exactly what modification work you will need to conduct.
As a minimum, you'll need:
You'll also probably need to remove the handbrake/gearshift surround in order to fit this thing - be warned, it is a bit fiddly, and if you're not careful, you're likely to cause some scratches on the existing trim.
Feedback welcome so I can refine the fit for future releases.
Print Time:
The main console section was ~18hrs for me (Cura prediction 26hrs)
The Lower infill piece was under 2hrs.
This has taken me a lot of hours to model... if it's been of use to you, if you're able to and would like to say thanks - You can always buy me a coffee :-)
https://buymeacoffee.com/richardsimkiss
| Smart_Roadster_Console_Lower_Infill_v3.stl | 2.7MB | |
| Smart_Roadster_Console__Cupholder_v3.stl | 19.3MB |
