This is a remix of the excellent STL by Cheeeese. i noticed a couple of things on the original file that made it tricky to fit to the cars window mech when printed. we moved the release guide tab closer to allow it to grip the metal guide properly, also there was a part of the print that stopped one of the two round window screw supports from going all the way through. I used an epoxy glue to secure the round supports. I recommend 100% infill and use a strong filament like pc or abs plus. PLA is not strong enough, the window is quite heavy and the regulator wires excerpt a lot of pulling pressure on the print. Also added extra material in certain places to stop breakage and rounded off the inner angles to add support.
| SMART_450_REGULATOR_Lamzo.stl | 190.0KB |
