Smaller Print-in-place Kaleidocycle 3D Printer Model
The file 'Smaller Print-in-place Kaleidocycle 3D Printer Model' is (stl) file type, size is 14.0 MB.
The file 'Smaller Print-in-place Kaleidocycle 3D Printer Model' is (stl) file type, size is 14.0 MB.
I wanted to print one, but 5 hours printing time was too much...
... Scaling down obviously messed with tolerances and clearances.
=> redisinged and remixed it from scratch with 5 to 6cm diameter, resulting in about 2h printing time.
Worked right away; clearance being 0.3mm
Uploaded new stl "nano":
Increased strength, even smaller, clearance to 0.3mm in really every spot.
| caleidocycle_nano.stl |
| kaleidocycle.stl |
