It's a small tree holder with a telescopic extensionable arm and a fixing screw. It is wallmounted with doublesided adhesive 3M tape and can be adjusted in distances to the wall between 15cm and 30cm.
The diameter of the holding ring is 25 mm.
| ALL-print-in-place_2h30min_layer-0.16mm.stl | 3.2MB | |
| rod-outside-adhesive.stl | 830.9KB | |
| rod_inside.stl | 833.9KB | |
| Screw-tree.stl | 703.1KB | |
| shell1-tree.stl | 481.7KB | |
| shell2-tree.stl | 435.8KB |
