Intended for different fasteners using proven box from this design. Items can't travel between sections when the box is closed.
Combine this parts to get one box:
* Box
* Lid XX - 2,5
* Two Drawers OR Drawer_deep
* One Top drawer
OR
* Box only top drawer
* Top drawer
- Use 2x M2.5x18 screws to connect lid to body, best are socket head screws.
- Designed to be printed from PLA, but if you have problem with lid clip durability, use PETG. It is easy print without supports.
- Use Lid xxx - 2,5. It is default lid with holes for M2,5 screws.
- If screws are loose and can't cut thread into the lid, use Lid xxx 2,4. It has smaller holes for the screws.
- I print Lids with PLA except silk ones. These are too fragile, or I can't print them correctly for this use.
- 6.8.21 (v1.4) added Box only top drawer. It is box with space for top lid only. I use it for M6 screws, where the drawers are to small and not needed. So the box is used for screws, top lid for nuts. Reworked lids text, repaired small faults.
- If possible, use M2.5x16 or M2,5x18 screws with socket head.
- 5.8.21 (v1.3) added Lid_empty_easy_edit for easy edit to add your own text. It is centered at origin point.
- 18.7.21 (v1.1) added Lid PC for PC screws etc, Top drawer 1 - Top drawer with 1 slot and reinforced walls, Drawer deep - Deep drawer with reinforced walls and height of 2 regular drawers.
- 31.7.21 (v1.2) added Lid empty for your text.
| Box.stl | 436.0KB | |
| Box_only_top_drawer.stl | 455.2KB | |
| Drawer_2.stl | 264.7KB | |
| Drawer_2_v2.stl | 138.0KB | |
| Drawer_3.stl | 281.9KB | |
| Drawer_4.stl | 140.7KB | |
| Drawer_4_v2.stl | 290.3KB | |
| Drawer_6.stl | 323.7KB | |
| Drawer_deep_2.stl | 273.4KB | |
| Lid_2.4_empty.stl | 514.2KB | |
| Lid_2.4_Logo.stl | 517.8KB | |
| Lid_2.4_M2.5.stl | 568.7KB | |
| Lid_2.4_M2.stl | 537.9KB | |
| Lid_2.4_M3.stl | 551.4KB | |
| Lid_2.4_M4.stl | 520.1KB | |
| Lid_2.4_M5.stl | 538.7KB | |
| Lid_2.4_M6.stl | 549.8KB | |
| Lid_2.4_Nuts.stl | 568.7KB | |
| Lid_2.4_PC.stl | 551.7KB | |
| Lid_2.5_empty.stl | 507.2KB | |
| Lid_2.5_Logo.stl | 510.7KB | |
| Lid_2.5_M2.5.stl | 561.7KB | |
| Lid_2.5_M2.stl | 530.8KB | |
| Lid_2.5_M3.stl | 544.3KB | |
| Lid_2.5_M4.stl | 513.1KB | |
| Lid_2.5_M5.stl | 531.6KB | |
| Lid_2.5_M6.stl | 542.8KB | |
| Lid_2.5_Nuts.stl | 561.7KB | |
| Lid_2.5_PC.stl | 544.7KB | |
| Top_drawer_1.stl | 30.6KB | |
| Top_drawer_2.stl | 231.4KB | |
| Top_drawer_3.stl | 255.7KB |
