I use this small storage cabinet to put the keys.
You need a 300x300mm build plate in order to print this design scale 1, You can certainly reduce the size to fit a 200x200mm build plate but I haven't tested.
It is printed in wood and white PLA using 0.28mm layers with no support.
You will need M3 16mm screws to fix the knobs, it is preferable to re-drill the holes in the drawers with a 3mm drill bit.
| SmallCabinet_body_-_Part_1.stl | 76.8KB | |
| SmallCabinet_drawer_-_Part_2.stl | 31.3KB | |
| SmallCabinet_drawer_knob_-_Part_3.stl | 2.0MB |
