I've build this car with 2 old motor/esc from racing drone and a servo. It's best to use 2206 xnova motor but you can adapt the gear to work with any motor.
The tires need to be print in flexible filament.
Obviously racing drone motor are way to powerfull, you will need to reduce the throttle input in the radio control to have a mangeable car.
You can set up differential throttle to turn better.
I've only use M3 screw 10, 20 and 30mm long
| front_plate.STL | 63.5KB | |
| front_rim.STL | 449.3KB | |
| geared_rim.STL | 559.1KB | |
| main_plate.STL | 131.9KB | |
| motor_fixation_L.STL | 123.8KB | |
| motor_fixation_R.STL | 124.2KB | |
| servo_horn.STL | 34.4KB | |
| small_gear_xnova2207.STL | 135.0KB | |
| steering_plate.STL | 42.1KB | |
| tire.STL | 825.3KB | |
| wheel_fixation_L.STL | 57.6KB | |
| wheel_fixation_R.STL | 57.6KB |
