Small Parts Cabinet 3D Printer Model Free Download

Description Files (12)

Summary

Small parts organizer. The number of drawers, width, and depth can easily be changed in the OpenSCAD code. I have only printed one myself so far using default values (5 drawers, 100mm width, 80mm depth), but have rendered numerous sizes which appears to work well. Just make sure you match the values in the cabinet and drawer files. There are five drawer types you can choose from. Nubs are printed on each drawer level of the cabinet to keep them from falling out too easily. Supports should be enabled for the drawers so that the handles will print correctly.

Update 10/14/19:

Added main cabinet to customizer. You can now set the number of drawers vertically, and the number of rows horizontally. Note that the drawer dimensions also show up in the customizer, but are not intended to be changed there. If you do change them, the OpenSCAD files for the drawers would also need to be changed. Not sure why the drawer dimensions are showing up in Customizer, might be the new OpenSCAD version causing it. Also added some small nubs to make cabinets stackable after a suggestion from Mercery049. Note that they are pretty small as I didn't want to add thickness to the top/bottom. A drop of glue in each one would probably be sufficient if they don't hold together well enough (haven't printed a second one to stack yet myself).

Update 04/06/19:

Modified drawer #5 with a suggestion made by Darrel Raines. He noticed that this drawer was hitting on the nubs that help hold them in. I added his change and updated. Thank you Darrel for letting me know about this.

Cabinet.scad	3.2KB
Cabinet.stl	4.4MB
Drawer_1.scad	554.0B
Drawer_1.stl	171.2KB
Drawer_2.scad	756.0B
Drawer_2.stl	173.1KB
Drawer_3.scad	773.0B
Drawer_3.stl	175.5KB
Drawer_4.scad	963.0B
Drawer_4.stl	176.9KB
Drawer_5.scad	862.0B
Drawer_5.stl	177.0KB