Small Organization Boxes 3D Printer Model
The file 'Small Organization Boxes 3D Printer Model' is (stl,skp) file type, size is 211.7KB.
The file 'Small Organization Boxes 3D Printer Model' is (stl,skp) file type, size is 211.7KB.
I bought some screws from LUX-tools (super expensive, I was probably paying for the box than the screws) shown in the second picture
Either way, it gave me the idea for this "project"
Super simple, print what you need, and assemble them together
| box-covernot-tested.stl | 33.4KB | |
| box-double-female-with-hole.stl | 49.4KB | |
| box-double-female.stl | 22.6KB | |
| box-double-male-with-hole.stl | 49.4KB | |
| box-double-male.stl | 22.3KB | |
| box-male-female-corner-1.stl | 23.1KB | |
| box-male-female-corner-2.stl | 22.6KB | |
| box-male-female-corner-with-hole-1.stl | 50.6KB | |
| box-male-female-corner-with-hole-2.stl | 49.2KB | |
| box-middle-with-hole.stl | 64.8KB | |
| box-middle.stl | 37.5KB | |
| box-one-line-female-with-hole.stl | 46.6KB | |
| box-one-line-female.stl | 16.9KB | |
| box-one-line-male-with-hole.stl | 45.8KB | |
| box-one-line-male.stl | 15.7KB | |
| box-one-line-middle-with-hole.stl | 56.2KB | |
| box-one-line-middle.stl | 26.5KB | |
| box-side-1.stl | 30.1KB | |
| box-side-2.stl | 29.9KB | |
| box-side-3.stl | 31.7KB | |
| box-side-4.stl | 30.5KB | |
| box-side-with-hole-1.stl | 57.4KB | |
| box-side-with-hole-2.stl | 57.6KB | |
| box-side-with-hole-3.stl | 58.7KB | |
| box-side-with-hole-4.stl | 57.9KB | |
| female-corner-filler-1.stl | 11.8KB | |
| female-corner-filler-2.stl | 11.8KB | |
| female-filler.stl | 11.4KB | |
| hanger-female.stl | 64.0KB | |
| hanger-male.stl | 63.8KB | |
| male-corner-filler-1.stl | 11.4KB | |
| male-corner-filler-2.stl | 11.4KB | |
| male-filler.stl | 11.4KB | |
| small_organization_boxes-plus.skp | 402.2KB | |
| standalone.stl | 7.0KB |
