Some small basic outworlds with 10mm holes. the roofs are 3mm laser cut acrylic. If you want to be able to open it you should glue small part called "dut" on top.
Can be used to feed small colonies still in test tubes. Connect the chambers with 10mm plastic tubes. I have included an adaptor for 14mm vanilla test tubes i found in the supermarket.
The ventilation holes can be up to 0.65mm wide which some ants can escape through. You can cut the files called "with hole" and cover the hole with a fine metal mesh for maximum escape proofing and extra ventilation.
Ive also included a small feeding plate so you can more easily put food into the outworld without contaminating the floor or sediment.
| big_roof.ai | 45.3KB | |
| big_roof.dxf | 64.9KB | |
| big_roof_with_big_hole.ai | 40.8KB | |
| big_roof_with_big_hole.dxf | 48.2KB | |
| connect3slashoutworld.stl | 102.2KB | |
| connector_roof.ai | 40.8KB | |
| connector_roof.dxf | 46.4KB | |
| dut_for_the_roof.stl | 28.2KB | |
| feeder.stl | 1.5MB | |
| omni_-_14mm_tube_adaptor.stl | 154.5KB | |
| outworld.stl | 58.9KB | |
| outworld_big.stl | 58.9KB | |
| outworld_small_roof.ai | 43.7KB | |
| outworld_small_roof.dxf | 53.8KB | |
| small_roof_with_hole.ai | 42.2KB | |
| small_roof_with_hole.dxf | 48.2KB |
![Y-axis Linear Bearing [624zz] 3D Printer Model](https://cdn.3axis.co/assets/cd/d0/ee/4a/cdd0ee4a-b50d-4de1-9f6c-a974d3522136/images/b42d89b3-ef6a-4bba-b236-7f5a20f5d98d_thumb.jpg)
