Small Foldable Dice Tower 3D Printer Model
The file 'Small Foldable Dice Tower 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Small Foldable Dice Tower 3D Printer Model' is (stl) file type, size is 1.7MB.
Since I often play D&D in a pub and the dices always fall from the table, I thought that a dice tower could be useful. However, I didn't find anything that was portable, small AND good-looking, so I tried designing something myself. I hope you'll like it!
(Credits to https://www.flaticon.com/authors/freepik for the front dragon)
To assemble together the various parts, use a thin metal wire (the diameter of the holes is 1.5 mm)
The holes on the left and right walls and on the big inner platform are for magnets, to make the structure stronger (the diameter of the holes is 15mm and the depth 2mm)
I printed it using marble PLA and I really liked the result!
| back_wall.stl | 94.9KB | |
| front_platform.stl | 4.0MB | |
| front_wall.stl | 604.4KB | |
| left_wall.stl | 207.1KB | |
| platform.stl | 143.6KB | |
| right_wall.stl | 207.1KB | |
| up_platform.stl | 81.5KB |
