Small Flowerpot With Drainage Holes 3D Printer Model
The file 'Small Flowerpot With Drainage Holes 3D Printer Model' is (stl) file type, size is 2.9 MB.
The file 'Small Flowerpot With Drainage Holes 3D Printer Model' is (stl) file type, size is 2.9 MB.
A small flowerpot with drainage holes. I also added a second version that works well for larger plants, and I've added versions with a lower polycount as well.
All files should be quite easy to print, except for files Flowerpot_inside_high and Flowerpot_inside_low. I would recommend to print those upside-down. It will make printing those feet a lot easier, but needs a lot more support material.
Feel free to scale the large pot up or down, it should work well at almost any size. I have not printed it at a large scale yet so if you do, please tell me how it works.
The tolerances on the seperated pots are 0.3mm.
I have now also added a new version of the seperated pot, called Flowerpot_small. It is way easier to print and can also be printed at a way smaller scale. I have successfully printed one that is about one centimeter in diameter with my FDM-printer. With a SLA-printer you could go even smaller. At this scale, howewer, it is hard to find a plant that can grow in it.
The tolerances are still 0.3mm by default so when printing extremely small pots you have to be aware of the tolerances. If the pot doesn't fit inside the cup, try scaling the cup up by a small amount.
| Flowerpot_high.stl |
| Flowerpot_inside_high.stl |
| Flowerpot_inside_low.stl |
| Flowerpot_large.stl |
| Flowerpot_low.stl |
| Flowerpot_outside_high.stl |
| Flowerpot_outside_low.stl |
| Flowerpot_small_Cup.stl |
| Flowerpot_small_Pot.stl |
