This is my second laser engraver, i call it "SE120" for "Small Engraver" with 120x120 for the bed size.
Technical informations:
Bed size: 120x120mm
Fast Moving Speed: 500mm/s more is possible
Speed Engraving: 0,1mm/s to +/-10mm/s
Full Magnetic Bed: Yes
Led built-in: Yes
Air assist: Yes
Bluetooth: Yes
PWM module: Yes
Limit switch: Yes
Bottom ambient light: Yes
Laser: 1500mW (Blue-Purple Light 405nm)
Step motor: Nema 17 (Brand "StepperOnline" 42x42x20mm)
Machine size: Wide=225mm, Deep= 225mm, Heigh= 219mm
Glasses Protection: Compatible with Blue-Purple Laser Light, between 200-540nm
In this version i fixed all the faults of the BE100.
10 improvements and novelties are emerging such as:
1) Real bed area work 120mm x 120mm (118mm x 118mm with limit switches option)
2) Full magnetic bed (Interchangeable with flexible aluminium surface for cutting projects)
3) Limit switches
4) Air assist
5) Bluetooth
6) PWM/TTL module
7) Bottom ambient light
8) GT2 instead of a trapezoidal screw
9) Linear bearing
10) Hidden Nema 17 Stepper Motor
SE120 Firmware: https://drive.google.com/file/d/1klKNJUFUkGRHD1hjFn0rWUIBdzDZfU2D/view?usp=sharing
How To Assembly The SE120 Laser Engraver at this link: https://youtu.be/vwXHBJemi5A
| Attache_Cable_Limit_Switch.stl | 72.2KB | |
| Attache_fils_Bas.stl | 17.0KB | |
| Attache_GT2.stl | 125.0KB | |
| Attache_LED.stl | 45.2KB | |
| Base_Arriere.stl | 275.0KB | |
| Base_Avant.stl | 129.2KB | |
| Base_Cote_Droit.stl | 118.5KB | |
| Base_Cote_Gauche.stl | 132.6KB | |
| Fan_Duct.stl | 50.2MB | |
| Firmware_SE120.zip | 169.9KB | |
| Led_Plateau.stl | 75.5KB | |
| Pied.stl | 1.6MB | |
| Plaque_de_support.stl | 157.5KB | |
| Plateau.stl | 78.8KB | |
| Portique_Droite.stl | 88.9KB | |
| Portique_Gauche.stl | 138.5KB | |
| Support_Air_Assist.stl | 143.8KB | |
| Support_HC-05.stl | 87.0KB | |
| Support_Laser.stl | 87.0KB |
