Small Dc Motor Gearbox 3D Printer Model
The file 'Small Dc Motor Gearbox 3D Printer Model' is (scad,stl,inc) file type, size is 1.3MB.
The file 'Small Dc Motor Gearbox 3D Printer Model' is (scad,stl,inc) file type, size is 1.3MB.
This is set of objects and scripts allowing to build very simple gearbox.
I made it mainly for re-use of small and weak DC motors.
They are usually too weak to use with printed planetary gearboxes, so they require
very low-torque first stage.
Changing and choice of gears is very easy as gearbox core support is based on
two threaded rods.
It contains parametric (or at least easy to modify - openscad) motor holder ,
skate bearings holders (they are used to support rome reductor gears)
threaded rod holder (this is used to fasten whole gearbox to a housing)
and plastic planetary gearbox for hex shaft (this allows supporting hex shaft and allows power output via hex shaft - for example to peristatic pump rotor)
perhaps more elements will come later.
It serves as great toy and can be used in any slow motion high torque application .
many elements are copied from other people's designs , i hope i've included all credits , if not - notify me.
| 608_bearing_with_ears.scad | 585.0B | |
| 608_bearing_with_ears.stl | 313.5KB | |
| 608_bearing_with_ears_M5.stl | 293.5KB | |
| bearing5x4_gears.stl | 2.1MB | |
| bearing5x5_gears.stl | 1.5MB | |
| bearing5_gears.scad | 5.7KB | |
| dc_motor_8.stl | 102.8KB | |
| dc_motor_9.stl | 113.4KB | |
| dc_motor_mount_with_ears.scad | 3.0KB | |
| dc_motor_mount_with_ears.stl | 252.2KB | |
| dc_motor_mount_with_ears_down.stl | 63.6KB | |
| dc_motor_mount_with_ears_up.stl | 63.6KB | |
| dc_motor_small_gear.scad | 1.6KB | |
| dc_motor_to_peristaltic_pump.scad | 1.6KB | |
| dc_motor_to_peristaltic_pump.stl | 924.7KB | |
| gearbox.scad | 2.5KB | |
| gear_bearing_with_ears.scad | 699.0B | |
| gear_bearing_with_ears_1.stl | 2.2MB | |
| mendel_misc.inc | 5.2KB | |
| parametric_involute_gear_v5.0.scad | 17.7KB | |
| PillowBlock_608_bearing.scad | 5.9KB | |
| PillowBlock_608_bearing_endplate.stl | 63.2KB | |
| PillowBlock_608_bearing_include.scad | 5.9KB | |
| polyholes.scad | 341.0B | |
| pump_drive_gear_include.scad | 1.6KB | |
| pump_peristaltic_include.scad | 14.6KB | |
| rome_reductor.scad | 1.8KB | |
| rome_reductor_40.stl | 620.2KB | |
| rome_reductor_50.stl | 695.0KB | |
| rome_reductor_60.stl | 785.2KB | |
| rome_reductor_70.stl | 904.2KB | |
| rome_reductor_80.stl | 991.2KB | |
| rome_reductor_include.scad | 1.8KB | |
| square_angle_with_ears.scad | 755.0B | |
| square_angle_with_ears.stl | 62.2KB | |
| square_angle_with_ears_for_peristaltic_pump_v2.scad | 3.4KB | |
| square_angle_with_ears_for_peristaltic_pump_v2.stl | 220.2KB | |
| two_part_block.scad | 1.1KB |
