Small Bunker Or Guard Shack 4×2 3D Printer Model
The file 'Small Bunker Or Guard Shack 4×2 3D Printer Model' is (stl) file type, size is 6.0MB.
The file 'Small Bunker Or Guard Shack 4×2 3D Printer Model' is (stl) file type, size is 6.0MB.
If you make something with my Tinkercad files, leave me a comment. I'd love to see how you use them.
This is a 4x2 inch bunker using the tinkercad pieces I've been creating. I added some 45 degree roof and floor tiles as well as a couple 45 degree wall pieces.
I'm still new to designing gaming pieces so please, if you have any suggestions, leave a comment.
This is the link to the Tinkercad file. You can make your own copy.
https://www.tinkercad.com/things/4zpSZnHon3w-4x2-bunker
This link has all the parts I've made so far. I'll be adding more as I think of them. You can copy these to your own Tinkercad creation and make your own. Just be sure to set the grid to inches. https://www.tinkercad.com/things/b6f3TkCntdk-building-parts
This is a small bunker that should work for human size characters in the 25mm to 28mm scale. I did this in inches rather than metric and the floor tiles are 1 x 1 inch and the walls are 1 x 2.25 inch panels. The door opening is 1 inch wide and 1.75 inches high. with the roof, the total height is 2.375 inches. The roof also has a 1 inch grid.
| Bunker_4x2.stl | 14.5MB | |
| Bunker_4x2_roof.stl | 12.4KB |
